Multi-Device Filmer's Kit
Quick start guide.
You may have received a different combination or quantity of these items, but you should have at least two of these components (a clip and a lens).
Connect X Lenses
(Additional Connect X Lens included with Filmer's Kit)
Cold Shoe Mount
How to use clip.
Press button on clip and attach to device, aligning lens over desired camera.
Use tab on lens to swap lenses. Or, remove, rotate and reinstall if needed to better align with camera.
NOTE: Previous generation iPhone 8/7 & iPhone 8/7 Plus lenses are not compatible with the Connect X lens system.
With Fisheye / Macro and Macro 7x / 14x, unscrew to reach secondary lenses.
Connecting to universal clamp.
Screw universal clamp clockwise onto 1/4-20 tripod mount of Pivot grip. Turn adjustable collar to secure in desired position.
Expand hinge on universal clamp to size of smartphone.
Insert smartphone until flush against back of clamp.
Connecting to GoPro® mount.
Screw GoPro mount clockwise onto 1/4-20 tripod mount of Pivot grip. Turn adjustable collar to secure in desired position.
Insert GoPro camera into slotted mount and use existing thumbscrew to lock in place.
Connecting to ¼-20 tripod mount.
Screw compact camera clockwise onto 1/4-20 tripod mount of Pivot grip. Turn adjustable collar to secure in desired position.
Using cold shoe mount.
Remove cold shoe insert.
Attach a lightweight microphone or light, and secure into cold shoe mount.
Holding and rotation.
To hold, grip the handle of Pivot and insert your index finger into the ring.
To adjust articulation, depress the rotation-lock button on the side of Pivot and rotate hub to desired position.
There is no right or wrong way to hold Pivot, but we recommend always using a wrist strap.
Did you know?
Additional Connect X Lenses are available to purchase HERE.
✔ Works with some slim device cases.
✔ Screen protector compatible.
✖ Not compatible with flash.
Care & Maintenance
We recommend keeping your device and olloclip products free of all debris and foreign particles to prevent any damage to either product. olloclip products will not damage your device. However, debris and foreign particles that come between your olloclip product and device could cause damage. Prior to putting your olloclip product on your device, use a soft, lint-free cloth to clean your device. It is also recommended that you ensure there is not any debris or foreign particles on the olloclip product itself. Placing an olloclip product on a device with a broken front or rear glass may cause pieces of glass to become embedded into the olloclip product and could cause damage to devices with which the olloclip product is subsequently used.
1-Year Warranty: We provided a One Year Limited Warranty for all olloclip products. They are guaranteed to be free from defects in materials and craftsmanship under normal use for a period of one year from the original date of purchase. At the sole discretion of olloclip, any defective product will be repaired or replaced with the same or an equivalent product. All original olloclip products must be purchased directly from olloclip or from an authorized reseller to be eligible for and covered under the One Year Limited Warranty. A sales receipt from the original olloclip authorized reseller is required for warranty service.
Exclusions: Our One Year Limited Warranty does not cover misuses, accidental damage, or abuse. Any damage caused by alterations made to an olloclip product or by using the olloclip product for other than its intended use is not covered under warranty. Damage to any non-olloclip product is excluded with any limitation. Shipping charges associated with returning any product for warranty service are not covered under the One Year Limited Warranty.